Request a Quote 1.800.745.6008 | info@cwwood.com
C.W. Wood Machinery, Inc.
Your Full Service New & Used Machine Tool Dealer
Sales - Service - Machinery Moving

Search Inventory

24"/31" x 120" Vanguard Lathe, Gap, 7.5-800 RPM, 5" Hole, Inch/mm, Taper, As-Is
24"/31" x 120" Vanguard Lathe, Gap, 7.5-800 RPM, 5" Hole, Inch/mm, Taper, As-Is
24"/31" x 120" Vanguard Lathe, Gap, 7.5-800 RPM, 5" Hole, Inch/mm, Taper, As-Is
24"/31" x 120" Vanguard Lathe, Gap, 7.5-800 RPM, 5" Hole, Inch/mm, Taper, As-Is
24"/31" x 120" Vanguard Lathe, Gap, 7.5-800 RPM, 5" Hole, Inch/mm, Taper, As-Is
24"/31" x 120" Vanguard Lathe, Gap, 7.5-800 RPM, 5" Hole, Inch/mm, Taper, As-Is
24"/31" x 120" Vanguard Lathe, Gap, 7.5-800 RPM, 5" Hole, Inch/mm, Taper, As-Is
  • 24"/31" x 120" Vanguard Lathe, Gap, 7.5-800 RPM, 5" Hole, Inch/mm, Taper, As-Is
  • 24"/31" x 120" Vanguard Lathe, Gap, 7.5-800 RPM, 5" Hole, Inch/mm, Taper, As-Is
  • 24"/31" x 120" Vanguard Lathe, Gap, 7.5-800 RPM, 5" Hole, Inch/mm, Taper, As-Is
  • 24"/31" x 120" Vanguard Lathe, Gap, 7.5-800 RPM, 5" Hole, Inch/mm, Taper, As-Is
  • 24"/31" x 120" Vanguard Lathe, Gap, 7.5-800 RPM, 5" Hole, Inch/mm, Taper, As-Is
  • 24"/31" x 120" Vanguard Lathe, Gap, 7.5-800 RPM, 5" Hole, Inch/mm, Taper, As-Is
  • 24"/31" x 120" Vanguard Lathe, Gap, 7.5-800 RPM, 5" Hole, Inch/mm, Taper, As-Is

24"/31" x 120" Vanguard Lathe, Gap, 7.5-800 RPM, 5" Hole, Inch/mm, Taper, As-Is

Brand
VANGUARD

Model
CW6263C-3000

Type
Lathes, Engine

Stock #
31209

Condition
As-Is

Year

Location
Cincinnati, Ohio
United States

Request Quote

Specifications

Equipped With

VANGUARD GAP BED ENGINE LATHE

MODEL: CW 6263C-3000
SERIAL NUMBER: GN08090802K

LATHE IS BEING SOLD AS-IS. PLEASE SEE TECHNICIAN'S NOTES BELOW.

GENERAL SPECIFICATIONS

Swing Over Bed: 24.8"
Swing Over Cross Slide: 14"
Swing Over Gap: 31.5"
Gap Width: 12"
Distance Between Centers: 118.11
Bed Way Width: 21-3/4"
Spindle Nose: D1-11
Spindle Bore: 5.11"
Spindle Speeds: 7.5-800 rpm
Number of Spindle Speeds: 18
Cross-Slide Travel: 12.5"
Compound Travel: 7.8"
Threads & Feed Range
Metric Threads (50): 1-240 mm
Inch Threads (14): 1-14 tpi
Module Threads (53): .5-120mm
Diametral Pitch Threads (24): 1-28 D.P.
Leadscrew Diameter: 2.140"
Tailstock Quill Travel: 9.8"
Tailstock Quill Taper: 5 MT

EQUIPPED WITH

15 HP Drive Motor
15" 3-Jaw Chuck, 24" 4-Jaw Chuck, 15" 4-Jaw Chuck
7" Capacity Steady Rest
16-1/2" Capacity Steady Rest (Has cracked base)
Taper Attachment

TECHNICIANS NOTES
*Machine is wired for 460 Volts.
*Spindle sounds ok.
*The forward/reverse/stop linkage is not adjusted properly. The clutches and brake also need adjustment.
*Hydraulics may need some adjustment as well.
*The E-Stop button on the carriage does not work. Safety switch for the chuck guard does not work.
*Readout does not work. There is no scale or reader for the cross slide and the reader is missing from the carriage.
*Coolant pump does not work.
*Power feed for the cross slide and carriage do not work except in rapid mode. The feed rod does turn so I suspect that a key is sheared in   the apron.
*No chip pans. 

These are known issues with lathe. Lathe being sold As-Is. No warranty or return privilege. Potential buyers are welcome to visit our facility for in person inspection.

Approximate Dimensions: 205"L x 55"W x 58"H
Approximate Weight: 10,500 Lbs.

 F.O.B. Cincinnati, Ohio

ALL SPECIFICATIONS SUBJECT TO VERIFICATION BY PURCHASER